All wireless signals are carried through the air by electromagnetic waves.
Choose correct answer/s
True
False
Check answer
Question 2
Free
True/False
NFC tags are very expensive and cannot be purchased blank, requiring them to be pre-loaded.
Choose correct answer/s
True
False
Check answer
Question 3
Free
True/False
The Wi-Fi Protected Setup PIN can be easily cracked through a brute force attack.
Choose correct answer/s
True
False
Check answer
Question 4
Free
True/False
Infrared technology utilizes an LED that emits light with shorter wavelengths than red light.
Choose correct answer/s
True
False
Check answer
Question 5
Free
True/False
The most secure Wi-Fi communication is made possible by combining a RADIUS server with WPA or WPA2, known as WPA-Enterprise or WPA2-Enterprise, respectively.
Choose correct answer/s
True
False
Check answer
Question 6
True/False
Due to many vulnerabilities and a short key length, the WPA security standard was replaced with WEP.
Choose correct answer/s
True
False
To unlock the question
Question 7
True/False
Z-Wave transmissions have a range of up to 50m per hop, and can tolerate up to 8 hops through repeaters.
Choose correct answer/s
True
False
To unlock the question
Question 8
True/False
The LLC sublayer is primarily concerned with managing MAC addresses in message frames.
Choose correct answer/s
True
False
To unlock the question
Question 9
Multiple Choice
Diffraction has what affect on a wireless signal's propagation?
Choose correct answer/s
The signal is redirected into multiple directions.
The signal is split into secondary waves that continue in the direction in which they split.
The signal is returned back towards the source of the original signal.
The signal is completely absorbed by the diffracting material.
To unlock the question
Question 10
Multiple Choice
How does refraction affect the propagation of a wireless transmission?
Choose correct answer/s
It distorts the signal as it travels into and through a different transmission medium.
It splits the signal into secondary waves that continue in the direction in which they split.
It causes the signal to be returned back towards the source of the origin.
It causes the signal to be absorbed by the refracting material.
To unlock the question
Question 11
Multiple Choice
In Linux, what command can be used for viewing and setting wireless interface parameters?
Choose correct answer/s
ifconfig
iwconfig
wlanconf
wifid
To unlock the question
Question 12
Multiple Choice
At what layer of the OSI model do the 802.11 standards vary?
Choose correct answer/s
Physical layer
Network layer
Data link layer
Transport layer
To unlock the question
Question 13
Multiple Choice
What special signal is issued periodically from an AP and contains the network transmission rate and service set identifier (SSID), as well as other information needed for a computer to associate with the AP?
Choose correct answer/s
broadcast frame
beacon frame
announcement packet
alert message
To unlock the question
Question 14
Multiple Choice
In IEEE terminology, a group of stations that share an access point are said to be part of which of the following?
Choose correct answer/s
extended service set
basic service set
modified service set
generic service set
To unlock the question
Question 15
Multiple Choice
What 802.11 frame type is involved in association and reassociation, including probe and beacon frames?
Choose correct answer/s
management frames
control frames
data frames
extended frames
To unlock the question
Question 16
Multiple Choice
Which 802.11 frame type is related to medium access and data delivery, and includes ACK and RTS/CTS frames?
Choose correct answer/s
management frames
control frames
data frames
extended frames
To unlock the question
Question 17
Multiple Choice
How does the 802.11 data frame indicate how a large packet should be fragmented?
Choose correct answer/s
It uses the preamble header to estimate the ideal packet size.
The frame check sequence dictates the calculated packet size.
The sequence control field indicates how packets will be subdivided.
The duration field determines how long the station can transmit a packet, which then determines how it is divided.
To unlock the question
Question 18
Multiple Choice
The use of multiple antennas on an access point to issue a signal to one or more receivers is enabled by what 802.11 innovation?
Choose correct answer/s
multiple input-multiple output (MIMO)
channel bonding
frame aggregation
spread spectrum frequency hopping
To unlock the question
Question 19
Multiple Choice
In an 802.11 data frame, what is the size of the frame check sequence field?
Choose correct answer/s
2 bytes
4 bytes
6 bytes
8 bytes
To unlock the question
Question 20
Multiple Choice
How many data streams are used in 802.11ac Wave 2 devices?